replaced headgasket now truck wont start

[ldooley]

I recently replaced the head gasket on my 86 ford ranger. the truck has a 2.3l 4cyl. Everything was runningg fine until i replaced the head now the truck wont start. it will crank but will not fire. I replaced the plugs, wires, distro cap, and disto rotor. I am getting spark from the coil and spark to the plugs, but the truck still will not start. What could this be?

 

[RangerFabWorks]

are you getting fuel?

 

[Bob Ayers]

Are you sure you had everything lined up when you installed the timing belt?

 

[Bryan22]

as black widow suggested, sounds like a fuel problem. if you have fire at the plugs, it's not a spark problem. Make sure you got all your connections hooked back up tight. when i did a motor swap on mine it wouldn't start at first. Finally i just double checked everything, and one little connector made a click when i pushed it tighter, bingo vroom.