Welcome Visitor! Please take a few seconds and GMalex
New Member
- Joined
- Jul 16, 2008
- Messages
- 2
- Vehicle Year
- 1988
- Transmission
- Manual
Hi Guys
Ok, I have a 1988 Ford Ranger, 2.3Litre Fuel Inj, I have gone through everything such as: Replaced fuel filter, checked Inertia switch, injectors, Pumps and it still won't start. I have plenty of spark, new distributor, cap, rotor, plugs, wires, and still won't start.
It turns over fine and I even disconnected the return fuel line in desperation to see if fuel was actually getting through, and every time I turned the key fuel pumped into the container. What am I missing?
This all started when I was just leaving work one day and only got about 3 blocks when It just stalled and wouldnt start since.
This is my only vehicle to and from work. HEELLLP!
Ok, I have a 1988 Ford Ranger, 2.3Litre Fuel Inj, I have gone through everything such as: Replaced fuel filter, checked Inertia switch, injectors, Pumps and it still won't start. I have plenty of spark, new distributor, cap, rotor, plugs, wires, and still won't start.
It turns over fine and I even disconnected the return fuel line in desperation to see if fuel was actually getting through, and every time I turned the key fuel pumped into the container. What am I missing?
This all started when I was just leaving work one day and only got about 3 blocks when It just stalled and wouldnt start since.
This is my only vehicle to and from work. HEELLLP!
