• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Rattling in front end


blkmazda90

Well-Known Member
Joined
Dec 17, 2007
Messages
185
City
Maine
Vehicle Year
1995
Transmission
Manual
New here...old username was 95blkmazda if anyone remembers...my question is if you guys would have a clue of what could cause clunking in the front end. when i hit bumps is when it does it..kind of a rattling..2 new ball joints..new wheel bearings..ive looked i dont have a clue....any ideas
 
Welcome back!

Check all the suspension bushigs; I-beam pivot, radius arm, sway bar, and maybe hubs too.
 
I have sort of constant rattle that happens when the road isnt perfectly smooth. I think it might be tie rods.
 
check your lower shock mounts. i've had them work loose and clunk around
 
Rattle

The most common cause of a rattle and clunk over an uneven surface are the sway bar links and then loose shocks. The sway bar links are hard to diagnose due to the fact that if you grab them and try to get them to move by hand they won't. I would suggest getting a friend to check it out with you. Park the truck and crawl under the front end. Then have your friend grab your truck and shake it side to side HARD. This should set off a loose shock or worn sway bar link bushing. If it is the sway bar links you can buy a new bushing kit for about $20. Let us know how you make out.:icon_thumby:
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top