ranger 1990 2.9l clutch project

[dark_flame221]

My Ranger is in great need of a new clutch. It will be my first time doing a clutch project. What clutch kit should i order ? (im not looking for a performance part just something that is quality) I will also need a slave cylinder.

I'm also looking for advice and experience of people who has done it before. I already made my homework, i've read alot about it. THX

 

[Broncojumper87]

Do the 4.0 liter clutch swap there is a write up in the tech section. Its super easy I did it in my b2 and have no complaints.

 

[88ranger5speed]

Well the transmission is a pain in the ass to get out with the exhaust pipes. I did a body lift to get mine out. I just ordered a cheap 80$ clutch kit off ebay. And 10 thousand miles later It's still going strong. I also just did the cheap auto zone parts on all my clutch items and they are also still good.

 

[Broncojumper87]

The trans was kind of easy for me at least had it apart and back together in less then a weekend. I bought most of my swap parts from rock auto flywheel clutch kit starter and oem 4.0 starter wire cost me like 300 bucks. Seeing that the autozone clutch kit that I just put in had less than 1000 miles on it burned up while doing some mild wheeling the 4.0 cluych swap is more then worth it.