I was wondering what the OD of body lift pucks need to be, I found dome pre cut 1in steel ones on craigslist for a 4runner and I was gunna figure out if they fit.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Quick and easy Question...
- Thread starter Bennybooster
- Start date
3". but you can get PA ones at this link for like $2
http://www.shopatron.com/products/productdetail/part_number=BB01/706.2.1.1.2477.0.0.0.0
I think i'm going to do this in combination with lift coils and AAD. So i get all the clearance of a 3" BL but without the giant space between the body and frame and get a better ride out of the suspension
http://www.shopatron.com/products/productdetail/part_number=BB01/706.2.1.1.2477.0.0.0.0
I think i'm going to do this in combination with lift coils and AAD. So i get all the clearance of a 3" BL but without the giant space between the body and frame and get a better ride out of the suspension
How Many do I need??
i could be wrong but i think it's 14
Anyone else??
strvger
Well-Known Member
- Joined
- Feb 25, 2009
- Messages
- 3,013
- Vehicle Year
- 1997
- Transmission
- Manual
i'd check the body mount bushings and see if they need replacing. lots easier when you already have the truck on jacks for the body lift. i did bushings and lift at the same time.
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
