Questions before starting.....

[sixty9oz]

Ok, here's what I got..92 STX extended cab, 4.0 4x4 (of course), 5-spd.

My buddy is getting a 94 F-150 regular cab 5.0 4x4 auto and he only wants the front clip and i can get anything else. I plan on swapping the engine/tranny/transfer case into mine. Truck was a daily driver but got side swiped. Supposedly runs great, I should know more in the next few days.

I know I need wiring harness and computer from donor, new motor mounts, oil filter relocator, headers/manifolds....what else do I need? Also, can anyone give me a straight answer on the headers in the Jegs swap kit? Headmans I believe, can't seem to get a straight answer reading the forums.

 

[RangerSVT]

The truck intake won't work, you will need a car intake. I'd also get the harness and ecu from a car or ex, as they are more friendly to upgrades. The truck ecu will work as long as you change NOTHING else on the motor (cam, heads, intake, etc)

SVT

 

[sixty9oz]

just curious as to why you can't use the truck intake

 

[RangerSVT]

It's way too tall, even with a 3" body lift, it still won't clear the hood closing...

SVT

 

[sixty9oz]

That's what I figured. May use the truck computer until I can get something else, unless I find something before I do the swap