questions about lifting bronco II

[Deamers87ford]

i have a 87 bronco II i was wonder what all i have to do to the driveline and such on a 4inch lift i dont do extreme offroading but i may some time

 

[metalmacguyver]

Well the D28 front axle is not very strong. A D35 from 90 and up rangers/exploders will bolt in.

You dont need to adjust the drive shafts with only a few inches of lift.

 

[rickcdewitt]

get a drop pitman arm if you don't have one,and metalmac's suggestion is a good one.next time you need brakes or something,take that money and plunk it down on a junk yard axle in good shape to replace the wimpy stuff up front.it bolts in but you might need to cut down the front driveshaft an inch.

 

[Deamers87ford]

thanks

thanks guys i will tell my dad that and see if he will let me lift it

 

[Totalled]

You will have to replace the stock rear CV style drive shaft with a u-joint style shaft with any lift.