Progress of 302 efi swapped Ranger

[SelrahcB]

This truck is a thing of beauty. If I ever saw it driving on the road, I would not be able to pick my jaw back up. You have put a lot of time into it and it has paid off. Your wife took some amazing pictures and it seriously is a great truck. Keep it up!

 

[reef93]

This truck is a thing of beauty. If I ever saw it driving on the road, I would not be able to pick my jaw back up. You have put a lot of time into it and it has paid off. Your wife took some amazing pictures and it seriously is a great truck. Keep it up!

Thanks much appreciated It definitely draws attention wherever it goes

 

[reef93]

Real pleased with how everything turned out on Dads truck we got the first round of mods buttoned up today. The battery is relocated along with the power steering and overflow tank. Modified the top radiator hose and radiator for a cleaner look. Made a cold air kit for the truck and last but not least installed an electric fan. Oh and a few polished goodies. Now its time to start putting up stuff for the next rounds of mods...lol

 

[reef93]

Before and after. MUCH better IMO!

 

[reef93]

https://photos.app.goo.gl/oEYW5dl5sLIg75Ae2
Not sure if the pictures were working or not above link should.

 

[ATX]

I️ totally dig the build brotha .


Sent from my iphone while gettin sidewayz!!!

 

[svtcards]

how hard was it to do the wiring on it?im in a process of doing this to my 87 that also has a 4 banger in it.looking for an explorer at the moment as a donor for the 302.did u have a drive shaft custom made or did stock shaft work?what do u have for a trans in it?

 

[reef93]

how hard was it to do the wiring on it?im in a process of doing this to my 87 that also has a 4 banger in it.looking for an explorer at the moment as a donor for the 302.did u have a drive shaft custom made or did stock shaft work?what do u have for a trans in it?

Wiring was not difficult at all. We were able to source an aluminum ds the length we needed out of the junkyard. And we are running a stalled Aod with a shift kit but are currently getting parts together for a 5spd swap

 

[reef93]

Preview of what we currently working on on the truck. We are also going to add the oil pressure and water temp. in the vents above the radio......Cant wait to see this part of the truck finished

 

[reef93]

Got the gauges mounted in the cluster with the black ABS. Now on to the vent gauges

 

[reef93]

Almost complete just button up the wiring on the vent gauges and its good to go.GPS speedo should be way more accurate!

 

[whwaufmaio]

Almost complete just button up the wiring on the vent gauges and its good to go.GPS speedo should be way more accurate!

Looks clean, nicely done.

Sent from my SM-N950U using Tapatalk

 

[Denisefwd93]

Looks clean, nicely done.

Sent from my SM-N950U using Tapatalk

That's pretty interesting you don't need a subscription or have to pay a service to have this speedometer work on the GPS? I'm asking because I have this Nearly New transfer case that came with a Nearly New 98 4.0 and m5od. transmission

 

[whwaufmaio]

That's pretty interesting you don't need a subscription or have to pay a service to have this speedometer work on the GPS? I'm asking because I have this Nearly New transfer case that came with a Nearly New 98 4.0 and m5od. transmission

That's funny you say that, I was sitting here googling that just now.

Sent from my SM-N950U using Tapatalk

 

[Denisefwd93]

That's funny you say that, I was sitting here googling that just now.

Sent from my SM-N950U using Tapatalk

Yes I think 98 was when they stopped using speedometer cables?