Pics of my project

[TS6034]

 

[Kyle M.]

Wow, good work - Looks great!!

 

[Rangersrule91]

What are you gonna do with the Y pipe ending there?

 

[TS6034]

It's not a Y pipe, I just didn't have the pass side header in yet. The picture makes it look real close but theres about a foot between it and the crossmember. I'm going to run the exhaust up and over it. I have to keep the exhaust above the bottom of the frame anyways because the truck sits on the frame when the bags are aired out.

 

[Rangersrule91]

Okay...Good Stuff

 

[TS6034]

I cut the core support to tuck the radiator up underneath. I was thinking that I would have room for the electric fan but theres only 3 inches between the rad and waterpump nub. So I'm going to use a flex fan instead.

 

[TS6034]

 

[TS6034]

Here is the radiator sitting up in the core support

 

[TS6034]

With one of the spacers I bought with the fan, theres about 3/4 inch clearance

 

[TS6034]

Scrapped the flex fan idea after I found some 10" fans that are only 2.5 inches deep.

 

[TS6034]

Pic of the front of the engine with the accys

 

[TS6034]

The battery, billet tray, and gold terminals are all part of the truck's "cool factor".

 

[TS6034]

The positive terminal shows the battery voltage on a red LED display

 

[Iron Ranger]

That battery LED readout is pretty sweet!!

Where did you get it?

 

[TS6034]

I got them on ebay for $30. I figured after spending $265 on a battery and battery tray, I couldn't put 99 cent terminals on it. Plus I like the LED display.