parts for swap

[joe joe]

can any one give me a list of parts i need to have for a d28 to d35 swap? and will my rotors and brakes swap over. what all needs to be changed? thanks alot for any help

 

[Sasquatch_Ryda]

You will need a complete hub to hub D35 and the steering linkage that goes with it.

Nothing from the d28 will swap over to the d35.

You will also need your front driveshaft shortened about 1.5".

 

[Sasquatch_Ryda]

http://www.therangerstation.com/tech_library/D28_D35_swap.html

 

[Hahnsb2]

As long as it's a 90-94 D35, your current brake calipers will work, other than that, everything is different.

 

[joe joe]

thanks

i realy thank everybody for the info. everybody around where i live is in to toyotas and samurais.i dont have anything against them,but theres not much knowledge on rangers.im 38years old i've owned 11 rangers best trucks ever.but this is my first 4wd

 

[joe joe]

change carrier

will the carrier in a stock d35 work with 5.13 gears

 

[Hahnsb2]

Yes.

 

[joe joe]

i have wires going down by the brake callipers on my d35 is this for auto hubs

 

[4x4junkie]

Probably wires for ABS brake sensors (the locking hubs operate mechanically). You won't need that for yours, so just cut 'em off or remove the sensors or whatever.