Ferris Bueller
Well-Known Member
2 weeks after it started to have very short engine cutoffs it finally threw a code. Anyone else get this code?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
P0108 code
- Thread starter Ferris Bueller
- Start date
gordo
Member
Look for a vacuum leak!
That code concerns the reading from your MAP (manifold absolute pressure) sensor. P0108 says it's too high. Because your intake is under a vacuum, which is negative pressure, that reading indicates that you are losing vacuum. (i.e., high reading means low vacuum)
Of course the sensor could be bad - but, when they go it's usually not intermittent. I'd look for cracked vacuum hoses or a malfunctioning IAC (that's the little "cylinder" directly down-stream from the throttle body).
That code concerns the reading from your MAP (manifold absolute pressure) sensor. P0108 says it's too high. Because your intake is under a vacuum, which is negative pressure, that reading indicates that you are losing vacuum. (i.e., high reading means low vacuum)
Of course the sensor could be bad - but, when they go it's usually not intermittent. I'd look for cracked vacuum hoses or a malfunctioning IAC (that's the little "cylinder" directly down-stream from the throttle body).
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
