oil pressure sensor location

[escort_gts]

Anyone know where the oil pressure sensor on a 89 2.3 is? Having problems trying to find it. There is just to much stuff in the way under the intake to locate it.
The gauge has stoped working and I need to see if it is the sensor, gauge, fuse,or I just lost all oil pressure together.

 

[scotts90ranger]

directly behind the #4 intake port and slightly below.

 

[escort_gts]

Ok, I figured that was the water temp. Thanks for the help

 

[scotts90ranger]

water temp is just above and behind the oil filter

 

[escort_gts]

ok, how about the water temp switch?

 

[scotts90ranger]

that is the gage sensor, the computer sensor is on the top of the intake manifold by the fuel injectors.

 

[dubluvv]

Are these locations the same for a '91 2.3L? I just bought a oil pressure and water temp gauge kit and am looking to hook them up.

Thanks!
Mitch

 

[steve63]

there at the same places on my 90,so they should be pretty close as 89-92 are very simular.

 

[scotts90ranger]

the locations in the block/head for the gage sensors are the same for all 2.0/2.3/2.5's

 

[escort_gts]

that is the gage sensor, the computer sensor is on the top of the intake manifold by the fuel injectors.

is it the one that is on the number 1 intake, or in the middle between 2 and 3?

 

[scotts90ranger]

on an '89 there should only be fuel injectors and the coolant sensor on top of the intake manifold by the injectors, it's a white connector, round with a little corner (kinda like a tear drop I guess). I'm using a '86 turbocouple manifold or I would look for you...

 

[escort_gts]

Ok, thanks for the help.