No spark

[BTimmerman]

I just did a full body job on my 93 ranger 4 liter including new rad saddle and new fenders, now I put it back together and I have a 12 pin connector that I can't figure out where it goes to and my truck turns over has gas but no spark any Ideas what this connector might be? It's located off of the wiring harness near the battery behind the front left headlight, I tested all the fuses and checked the coil pack the pack has power but is getting no signal so I'm guessing this connector is the problem

 

[helpme]

Check...

all the relays in the relay box.