new ride maybe? part 2

[ranger_mclaren]

Found this, anyone ever replaced a slave cylinder? its up under dash right? never replaced on before was woundering what was envolved.
http://columbus.craigslist.org/cto/1068372402.html

 

[Rangerman4158]

Slave cylinder is inside the bell housing not hard to do but if you change the slave you need to change the clutch master cylinder too

 

[BlackBII]

Slave cylinder in is in the bellhousing, so you will need to pull the tranny.

You don't have to replace the master, unless it is bad as well.

 

[Rangerman4158]

Typically the master will go out if you put in a new slave cause the pressure change will usually cause it to blow out