need help with blocks

[mkpecor]

i know they are not the best, i have a 6'' lift in front of my 88 ranger what size block im i going to need in the rear, [with out stock block], a 4'' block should do right? or should i put a 2'' block under my stock block.

 

[rangerslim]

Mike, I thought you were going with the explorer springs out back? there is 1-2" right there...To get it to look right I always try to go 2" lower in the back than in the front....
4" blocks should do the trick...

btw, I've got a 2" block under my stock block on my 4" lift.....so I know you will need more than that....

 

[mkpecor]

i just put them in and used all of the exploder pack and ranger packand itb is alil softer but its 2 1/2 '' lower in the rear, not happy with that swap not at all. so im guna do a block with 2 or 3 leafs and fab up a anti axle wrap bar. ill get the most flex going block.

 

[Sasquatch_Ryda]

With my 6" lift I had the explorer 4 door leaf pack with a leaf added from a b2, the stock block and an extended shackle to get it to sit level.

Now i've got the 63" chevy leafs (3 leafs in the pack) stock block and extended shackle, very nice ride, and mad flex

 

[mkpecor]

ya im doing the 63s here soon.

 

[99MazdaB4000]

never stack blocks, its a recipe for disaster. I wouldnt go any block over 5 inches.