Bronco_Chuck
Well-Known Member
I am planning on swaping my stock bronco II axles for some explorer axles. Does any body know wich year of axles i should look for? And also should i get the springs and such wile im at it?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Need help please?
- Thread starter Bronco_Chuck
- Start date
- Joined
- Aug 19, 2001
- Messages
- 10,904
- City
- So. Calif (SFV)
- Vehicle Year
- 1990
- Engine
- 2.9 V6
- Transmission
- Manual
- Tire Size
- 35x12.50R15
Front axle = '91-'94 Explorer, '91-'97 4.0L Ranger ('95-'97 Ranger will have dual-piston calipers, a possible upgrade from the previous single-piston ones).
Rear axle = '91-'01 Explorer ('95-'01 will have the rear disc brakes)
As for springs, I'd skip the coils and use coilspacers under your existing ones for a small lift, provided yours are in good shape (explorer coils are pretty stiff)
The Explorer rear leafs are a popular swap however (and while stiffer than your BII springs, they aren't overly so).
Rear axle = '91-'01 Explorer ('95-'01 will have the rear disc brakes)
As for springs, I'd skip the coils and use coilspacers under your existing ones for a small lift, provided yours are in good shape (explorer coils are pretty stiff)
The Explorer rear leafs are a popular swap however (and while stiffer than your BII springs, they aren't overly so).
Bronco_Chuck
Well-Known Member
Thank you. that there was exactly what i was looking for.
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
