need help asap

[outlaw]

If i lower my 99 ranger with lower a-arms do i need uppers 2 get the correct alignment chicks dig lowriders

 

[Hazmat Ranger]

Welcome outlaw, I wish I could help out but I have an older Ranger and I use I-Beams. Did you try the technical library to see if there is any information about it?

Good Luck

 

[Hazmat Ranger]

Try this link - I think it will answer all your questions

http://www.therangerstation.com/tech_library/Drop.html

 

[phatcap]

yes. get the djm kit. comes with upper and lower control arms, drop springs, drop shocks and rear flip kit. you'll also need the adjustable camber bolts for the upper arms to get the correct alignment.

 

[rat_ranger]

if your only going for 2in drop, no. for the 4in drop yes. And I agree with phatcap, its much simpler to get the whole kit and shocks to go with it.

 

[outlaw]

thanx for the input and advice

 

[Mark98xlt]

theres no way you can get a alignment close with stock uppers and djm coils and djm lowers for the 4 inch drop..