Name that lift


PlumCrazy

<<--Live Rangerously-->>

⭐Supporting Member
💻 TRS Socials
TRS Event Participant
TRS 20th Anniversary
2014 Truck of The Year
OTOTM Winner
Boosted (Not Stock)
Solid Axle Swap
TRS Banner 2010-2011
Joined
Sep 22, 2008
Messages
4,938
Points
3,101
City
Millersport, OH
State - Country
OH - USA
Vehicle
Ford Ranger
Transmission
Manual
Can anyone tell from these pictures what brand these lift brackets are?

They are for 4 or 6 coils, and I believe they were on an 86. I bought them from a guy who bought a Ranger with them already on it. I already gusseted the tabs. :icon_welder:

Name that lift


Name that lift


Name that lift


-plumcrazy
 
Im going to have to say skyjacker since its a drop bracket and not a drop plate...
 
Im going to have to say skyjacker since its a drop bracket and not a drop plate...
Skyjacker was my guess, just trying to see if anyone agrees.

-plumcrazy
 
Those are superlift. The Skyjacke rdrop bracket for the driver side beam(not the cast one) is alot beefier than that. That looks like superlift to me.
 
If the bracket on the right doesn't have "SKYJACKER" cast into it, it's a SuperLift.
 
agreed wizkid i have a tuffcountry kit and the passenger side bracket is made out of plate like you said and the drivers side is shaped differently.

Must be superlift???

Looks to be alot stronger with the gussets....i may end up doing that same thing to mine WHEN it starts to crack/fail.
 
The passenger side bracket looks a lot like a superlift, however, the drivers side does not....

:dunno:
 
Name that lift


Note the cast lettering on the red bracket to the left. That was an early design. The later ones were narrower down at the bottom to allow more differential clearance.
 
My cast bracket looks identical to the red one in JohnnyU's pic, but it doesn't have "SKYJACKER" cast into it. It does have a "B" cast into the front, and "RHB 35-6" cast into the back. I beleive the radius arm drop brackets were also cast, but I didn't buy them because Im going make some extended rad arms anyway.

-plumcrazy
 
Those are both 4 and 6", hence the two different holes on the bottom.
 
Last edited:
I know why there are two holes. I am trying to figure out what brand they are. I got them used and I am curious to know what kind they are.

-plumcrazy
 
I'm not intending to be rude but, Why does it matter?
 
I'm not intending to be rude but, Why does it matter?

It doesn't really matter, I am just curious and figured that someone would be look at them and tell me real quick. I don't really need to know.

-plumcrazy
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top