My Starter Fell OUT!

[swiperfoxx]

What Kind of bolts(2 bolts) are they?
Where can they be found?
I am stranded but I got my tools so i just need a place to buy these 2 starter bolts.

 

[Jon Boy]

not sure at the moment, but i used a quick fix once to get home. just use 2 smaller dia. bolts that are longer than the originals, run them all the way through and stick the washers and nuts on there. i wouldn't recommend this for very long though the smaller one will break after a few dozen times starting more than likely.

 

[stockfornow]

you should be able to get the bolts at autozone. When i replaced my starter one of the bolts was missing and they were the only one that had the right bolt. If it is a 2.9 i would also recommend threadlock as my bolt worked its way loose within 2 months.

 

[swiperfoxx]

So I guess the top bolt of the starter worked its way loose. The bottom just broke the tab. So i used the bottom bolt to tighten the top one. I am home now after 3 hours of driving. Auto Zone, Checker, and pep boys didn't have the bolts. It sucks.

 

[fastpakr]

Shouldn't be hard to get a couple of bolts at the junkyard.

 

[ejholmgren]

Shouldn't be hard to get a couple of bolts at the junkyard.

Assuming you can get there in a broke assed Ranger