Welcome Visitor! Please take a few seconds and 
Jimmeh
Well-Known Member
- Joined
- Jul 1, 2008
- Messages
- 281
- Age
- 37
- City
- Under GNP, Montana
- Vehicle Year
- 1992
- Transmission
- Automatic
I Cleaned it up a little bit today. I started becoming a little too unorganized in the tool box, and had a bunch of lumber in the back, so I organized and cleaned. Next up is a bath and a vacuum.
Pictures of my packed tool box:
It has:
2 50 foot cords
100 foot cord
50 foot air hose
14.4 volt Hitachi Impact Gun (boxed)
18 volt Hitachi 1/2 inch drill
18 volt Hitachi Sawzall
Dremel
Porter Cable 16 gauge finish gun (boxed)
Milwaukee 1/2 inch Power Drill/Roto Hammer (boxed)
Makita 4 inch Grinder (boxed)
Bosch Jigsaw (Boxed)
Storage container with all my bits, knife blades, sawzall blades, etc.
Mini tool box with my socket set, and a couple of straps.
Skill saw
Stud finder, laser level, and laser tape
2 foot level
2 foot framing square
12 inch square
My tool belt
Extra hand tools, such as two sets of needle nose pliers, tape measure, square, bunch of pencils and sharpies and stuff.
And the interior:
Has both my company jackets, my rain jacket, long sleeve shirt, work boots, trailer hitches (standard, 1 and 1/4", 5 and 1/4"), balls (2 1 and 7/8s and a 2 inch), iPod radio, straps, bungees, extra hardware, flashlights, paperwork, and my protective gear, such as ear plugs, safety glasses and gloves.
Now I am thinking of getting two side mount tool boxes for even more storage, as well as the already mentioned Ladder Rack. And I think for my bumper, I may try to get a custom one made that has a winch mount for pulling stuff. Within the last two weeks, I used my truck a few times to pull out fence posts on remodels, and I broke a strap in the process. So I think a winch would better serve. That, and for some of the wheeling the truck may see.
I'm also thinking of trying to get stiffer springs and shocks for the rear for when I get my Ranger all trailed up so I can trailer it to the trail. If not for that (just an idea, as the Ranger isn't going to be that wild anyway), it would be great for hauling heavy loads anyway.
Pictures of my packed tool box:
It has:
2 50 foot cords
100 foot cord
50 foot air hose
14.4 volt Hitachi Impact Gun (boxed)
18 volt Hitachi 1/2 inch drill
18 volt Hitachi Sawzall
Dremel
Porter Cable 16 gauge finish gun (boxed)
Milwaukee 1/2 inch Power Drill/Roto Hammer (boxed)
Makita 4 inch Grinder (boxed)
Bosch Jigsaw (Boxed)
Storage container with all my bits, knife blades, sawzall blades, etc.
Mini tool box with my socket set, and a couple of straps.
Skill saw
Stud finder, laser level, and laser tape
2 foot level
2 foot framing square
12 inch square
My tool belt
Extra hand tools, such as two sets of needle nose pliers, tape measure, square, bunch of pencils and sharpies and stuff.
And the interior:
Has both my company jackets, my rain jacket, long sleeve shirt, work boots, trailer hitches (standard, 1 and 1/4", 5 and 1/4"), balls (2 1 and 7/8s and a 2 inch), iPod radio, straps, bungees, extra hardware, flashlights, paperwork, and my protective gear, such as ear plugs, safety glasses and gloves.
Now I am thinking of getting two side mount tool boxes for even more storage, as well as the already mentioned Ladder Rack. And I think for my bumper, I may try to get a custom one made that has a winch mount for pulling stuff. Within the last two weeks, I used my truck a few times to pull out fence posts on remodels, and I broke a strap in the process. So I think a winch would better serve. That, and for some of the wheeling the truck may see.
I'm also thinking of trying to get stiffer springs and shocks for the rear for when I get my Ranger all trailed up so I can trailer it to the trail. If not for that (just an idea, as the Ranger isn't going to be that wild anyway), it would be great for hauling heavy loads anyway.
