My motor swap

[Mac]

thank you, well if thats what i gotta have, hey I GOTTA HAVE IT! lol

ill post it in my other threads as well and see what they say
what about this one? it says its 28oz

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-6316B 1&comp=LRS

Just for your info, found that site at a Mustang site co-founded by a D. Hearn, sound familiar?

 

[83bagged]

hearne? yea i know of him. he sent me 4 torque convertor nuts. i know him from RPS and on here as baddad.
hes the one who told me that i needed to get an aftermarket stang balancer. well is this one ok?

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-6316B 1&comp=LRS

 

[baddad457]

That's not me. It's an imposter.

 

[baddad457]

hearne? yea i know of him. he sent me 4 torque convertor nuts. i know him from RPS and on here as baddad.
hes the one who told me that i needed to get an aftermarket stang balancer. well is this one ok?

http://www.latemodelrestoration.com/iwwida.pvx?;item?item_no=LRS-6316B 1&comp=LRS

Not unless it's got the same pulley offset as a 94-95 balancer.

 

[83bagged]

ok hearne.

what do you suggest? if i cant find these 94-95 brackets and run the electric 16" fan as a puller

or buy the 79-93 fox serp kit and run a flex fan?

problem is i dont know what balancer to use, with either one of them. im going to start to call some yards around here to hopefully find them. HOPE.

 

[baddad457]

The 79-93 Stang FEAD is no shorter than what you're trying to cobble together. I suggest finding either a 94-95 Stang FEAD (which was used first on the 88-93 T-Bird/Cougar 5.0) Or a 96-2001 Explorer/Mountaineer 5.0 FEAD. Then get a 28 oz aftermarket balancer to fit either application. They ARE out there to be had, both the balancer (these would have been manufactured for stroker 5.0's in these cars of which 99% were balanced to 28 oz) and FEAD.

 

[83bagged]

yea i gotcha. im just steadily trying to track down the brackets man. they aren't hard to come by, its just they want a fortune for them everywhere. i understand why also, it just sucks lol.now the 96-01 explo fead saves just as much room? but my tuff stuff alt wont fit it? i think we talked about trying to run that set and thats why i didnt look for them. any 4 bolt 28oz balancer for the 94-95 mustang fead?