anybody got any idea how to get all the bolts out of the 1354 t case holding it to the transmission specifically the one next to the alignment pin i cant get a wrench in to turn it not enough plearance any ideas
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
mounting boly removal
- Thread starter mwood1985
- Start date
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
Drop the tranny crossmember and let the whole thing droop down.
I also find that its much easier to put the extension housing of the tranny because all of those bolts go into blind holes except for one at the bottom. As a result they come out really easy. the Tcase bolts have a tendancy to gaul in the aluminum and become very difficult to remove because they go into open holes.
I also find that its much easier to put the extension housing of the tranny because all of those bolts go into blind holes except for one at the bottom. As a result they come out really easy. the Tcase bolts have a tendancy to gaul in the aluminum and become very difficult to remove because they go into open holes.
Last edited:
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
