Mitsubishi FM146 shifter extender (bodylift)

[dark_flame221]

i just bought some new duff cab bushing to do a 3 inch bl but i cant find a complete kit to buy for my ranger 1991 2,9l 4wd manual with the Mitsubishi FM146 transmission i'm looking for the shifter extender all i found is some mazda transmission extented shifter

also beside this part would a body lift for a 1994 work on my truck they seem pretty similar...<


anybody did a 3inch bodylift on their second gen ranger ?

 

[dark_flame221]

c'mon somebody help me ! i would really love to bl my old ranger, i have the $$$ just got to order the right part !!! i'm going to back to school in august, i wont have time to do it so i got to order it soon

 

[dark_flame221]

kkkkkkk got my info pretty much sound like i will have to make some braket for the rear and front bumber + i dont need things like a extented shifter or to extented my gas line, sound weird but anyway im gonna do it, maybe some one could confirm how they installed their 3 inch BL on the second gen ranger ? i'm still a bit affraid about pinching a wire or a line (i've got A/C) or worst a brake line and since i'm going to install it in a old barn....


http://static.summitracing.com/global/images/instructions/pra-pa-742.pdf

 

[lil_Blue_Ford]

I put a Duff 2" on my 89 Bronco II with the FM-146, I didn't bother with the shifter extension, I just pulled up the trim around the shifters and made sure I didn't need to trim anything.

You will probably need a steering extension though.

And you will have to relocate your e-brake cable bracket on the frame under the drivers side door higher on the frame.

Not sure if you'll run into any other issues. I was able to get away without the steering extension and the rest is things I ran into doing it.