• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Military Mazda B4000 Bulls Build


i dont want to know what it takes to build a crazy machine.. why because i have mine already

maybe you need to know enough so that on a wheeling trip you can fix it instead of leaving it stranded in the woods/trail.....

still looks really good:icon_thumby:

l8r, John
 
i never leave anything stranded... i'll drive it home fcked. when its foobar keep drivin the piss out of her.

i know enough... i dont usualy go to a shop for repaires


never leave your rig unattended.... especialy something this special.. stupid people out there

id rather leave them a burnt down truck


Mmmm... yum 1tons and 40's one day!
 
Last edited:
yup... i was in ardbeg with my samurai on the may 24. stripped a spindle nut and lost the drivers front tire limped it about 15 mins on 3 tires sliding on a log and being towed. camped out beside it then the next day dragged it out with a f250.

$2000 in damage (kinda i decided to upgrade to landcruiser axles scince the samurai ones were destroyed)

but i sure as hell wasnt leaving it alone
 
exacly... dont give them anything.. RUN ER

its the price you pay to play with the big boys eh
 
yup. except im finally gonna be in a big boy truck. no longer in a samurai on 33s that goes everywhere that ppl need 38s for.

ill finally be on 38s trying to go everywhere ppl on 44s are going lmao
 
Leaving a rig unattended on the trail is bad news. Tweakers and theives will strip your rig if they get a chance. It is sad but you just can't trust people.

Being able to make trail repairs is absolutely necessary in my mind. Sometimes there is just now way around it.
 
Bed Matching the Body ISH

247845_10150646448525254_513770253_19377025_3097120_n.jpg

Got a new jack and torque wrench did my front driver side bearing. but for some reason it wont keep the right torque on the spindle nut.. idk what im doing wrong but my lock tab is in and it still keeps backing off...

herees my lock tab. anyone know how to install it correctly?
262382_10150646469945254_513770253_19377147_1746034_n.jpg


im going to my parts store to see if i can get the 4 lock washer or 6.. im not sure which one i need for my spindle either. but im sure it will work better then this piece of tin...
 
Last edited:
New Spindle Lock washers ordered. this week sometime i might install it. put locktight on it for now. and its holding up! right now all is good! this is before the trip this weekend.


DSCF0250.jpg


Took the rear box bedsides off and took a rip around

IMAG0016.jpg


IMAG0020.jpg


IMAG0006.jpg


The Power steering kept over heating i dont see any damage to it all seems oaky now but the little rad to cool the system was right under the fan getting hot air pushed threw it. im gonna rip out my tranny cooler in my parts truck for a larger one! all is fine now!

IMAG0009.jpg


heres a preview of whats to come up next!

DSCF0259.jpg
 
Trip Into Quebec

IMG_3307.jpg


IMG_3268.jpg


IMG_3368.jpg


IMG_3377.jpg


IMG_3378.jpg


IMG_3379.jpg


IMG_3380.jpg


IMG_3411.jpg


IMG_3525.jpg


IMG_3528.jpg


IMG_3534.jpg


IMG_3539.jpg


IMG_3544.jpg


IMG_3550.jpg


IMG_3552.jpg


IMG_3554.jpg


IMG_3555.jpg


IMG_3556.jpg


IMG_3576.jpg


IMG_3581.jpg
 
Last edited:
Your truck has come such a long way. Nice action. God I wanna wheel in Canada...
 
Time to make a skid for the shaft or make some beefy shafts. I have ruined 2 so far....I carry a spare lol
 
its in a very awkward place...

DSCF0250.jpg


i need a doubler to push it back a feet soo the 4link takes a beating not my shaft!

looks like i gotta start looking for a sector shaft to be built and hammer down on some repair's!
 
well stupid me i scraped my front shaft& Tcase with my old ford shoulda kept them...
this case doesn't seem to work anymore

i need a case with solid yokes.. and not a home made one! anyone know where i can find a donor? year/model?

heres my problem.

IMAGE_020.jpg


IMAGE_021.jpg
 

Sponsored Ad


Sponsored Ad

Special Events

Events TRS Was At This Year

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top