M5OD bellhousing bolt pattern

[john weeda]

Dose any one know where I could get a drawing on line for M5OD bellhousing bolt pattern I would like to make a adapter plate for it to fit a tdi alh diesel I have the drawing for the Alh!

http://www.haywood-sullivan.com/vanagon/TDI/tdi_engine_cad_drawing_small.pdf

pleaes help if you can! Thank you Jhon

 

[adsm08]

Um, which one?

There was the 2.9/4.0, the 3.0, the 2.3/2.5, the 2.3 Duratec, the 4.2/5.0/4.6/4.9....

That makes for 6 different versions, plus the HD for the 4.0 SOHC that had a pattern close enough to bolt to a normal 4.0, but one hole is moved.

 

[john weeda]

Um, which one?

There was the 2.9/4.0, the 3.0, the 2.3/2.5, the 2.3 Duratec, the 4.2/5.0/4.6/4.9....

That makes for 6 different versions, plus the HD for the 4.0 SOHC that had a pattern close enough to bolt to a normal 4.0, but one hole is moved.

sorry looking for the 2.3L with 8 plugs (duratec?)

 

[Mac]

If no one can help, just go to a JY and get a block plate you need.
Dave