Looking for help

[redneckpirate]

I have a 1986 Ranger 4x4 with a 2.9 lt. does anyone know where i can find a good, cheap wiring harness from the firewall out to all components and the relays and does anyone know if there is an aftermarket intake that will replace the fuel injection to a carb. This truck has a three inch body lift, nerf bard, brush guard, roll bar in bed with five 6in. off road lights. It has 12 in. billet alum. rims with a set 14.5 thornbirds and rancho 5000 shocks and stabilizer. The body needs paint but is other wise flawless, no rust. Would really appreciate any help i could get.

 

[GreatWhite]

welcome to trs

 

[mentalbreakdown00]

no aftermarket for 2.9 hardly at all and i am 90% sure you cant swap a 2.8 carb intake for a 2.9 adn you are stuck rewiring it yourself unless you can find a donor truck welcome to trs

 

[redneckpirate]

thanks

A donor ranger is the option i will probably go with. thanks for all the help and this site, i thought i was the only one on the planet who liked the rangers and bronco II's. THE TRUTH IS OUT THERE ! Maybe one day i will be blessed with enough disposable income ( hahaha ) to put a de-stroked 302 in my ranger.