light bars electricle

[headhunter257]

hey guys i did the light bar now how to wire it threw the b/2 any of you guys no how to hide the wire to the maximum i cant finger out how to get the wiring in the truck with out leaving a wire trail coming from the roof

my bad half a sleep when i did this i guess
i have my light bar and trying to keep all my wires on my roof as low profile as possible
the only way i can figger it out is to run the wire around the door and threw a tinny hole i made with a drill.
is their any better ways of doing this i guess im asking

 

[b2rich]

hey guy i did the light bar now how to wire it threw the car any of you guys no how to hide the wire to the maximum i cant finger out how to get the wiring in my light bar right now i just drilled a hole above the rubber for the foor and snuck the power wire in their

 

[The Jester Race]

hey guy i did the light bar now how to wire it threw the car any of you guys no how to hide the wire to the maximum i cant finger out how to get the wiring in my light bar right now i just drilled a hole above the rubber for the foor and snuck the power wire in their

[Jules Winnfield]English Mother ****er!!!! Do you speak it?!![/Jules Winnfield]

 

[ThatGuy]

Well you did a good job snucking that wire in there id just go ahead and hook that summabich to a flip switch and then run the other side of that switch to like your radio fuse then take that ground wire and weld it to your frame with some 6013 rod id cover up the loose wire with some duct tape that will look real good specially if your truck is silver you are good to go then you flip that switch and bam you got some lights so you can see to tie that noose in the tree at night

 

[Chevelle Kid]

Omfg

 

[02RangerXLT]

hey guy i did the light bar now how to wire it threw the car any of you guys no how to hide the wire to the maximum i cant finger out how to get the wiring in my light bar right now i just drilled a hole above the rubber for the foor and snuck the power wire in their

Translation:

Hey guys, I installed a light bar and now I am wondering how to run the wires from the light bar, into the car to a switch, and to the battery. I want to hide the wires as much as possible.

As far as the last two sentences, you got me, I have no clue.

 

[NMB2]

holy shit.

 

[headhunter257]

my bad half a sleep when i did this i guess
i have my light bar and trying to keep all my wires on my roof as low profile as possible
the only way i can figger it out is to run the wire around the door and threw a tinny hole i made with a drill.
is their any better ways of doing this i guess im asking

 

[K-Slice]

English must not be your first language...
ANYWAY, Unless you want to drill a hole in your roof and risk it leaking, that's as good as its gonna get.

 

[headhunter257]

it is my first language k- slice

 

[NMB2]

drill your roof and use silicone to seal it.

 

[The_Dealer]

i did mine down the channel into the door seal. glad i didnt drill a hole in the roof cuz i took them bad boys off. o well got me some rocklights now

 

[headhunter257]

[/IMG]

[/IMG]
so i just ran the wire around the metal gutter thing and have my off road lights on my roof rack but was kinda wanting to go for that more clean look

 

[The_Dealer]

put the rest under the trim for teh rear windows

 

[K-Slice]

it is my first language k- slice

Hmm, would have never guessed..
Buy some metal or black plastic conduit. Makes it look a lot better.