Lifting front end cheap

[OlYeller]

My 2wd ranger is my daily driver..occasional dirt road/corn field...not gonna be jumping any dunes, but looking to add a more aggressive look without breaking my wallet..I found these on ebay..

http://cgi.ebay.com/ebaymotors/1998...907Q2em263QQcategoryZ33585QQitemZ370408022294

thoughts?

Also considering F150 coils possibly?

 

[r1hatman]

I wouldn't. washers are a lot cheaper and more sturdy. Or F150 springs form a JY like I did.

 

[OlYeller]

Where could I find suitable washers?

 

[Grey_04]

washers can be had at any hard ware store.. or use this.
http://cgi.ebay.com/ebaymotors/Lift...r_Truck_Parts_Accessories&hash=item483700f1c2

 

[Ranger Sport Honduras]

yours is a 07? if so washers or F150 coils wont work on it.

u must get the spacers u found on e-bay

 

[subydrift]

I'd go with spacers over replacement lift springs. Especially if its your DD. I had the 2" lift springs on my 2004 and it was super stiff. I ended up taking them off. You should look into 3" lift spindles also. Easier than the spring spacers and you keep your stock ride quality.

 

[OlYeller]

http://shop.suspensionmax.com/Shop/Control/Product/fp/vpid/4941835/vpcsid/0/SFV/32526

Would I need to install any other aftermarket part along with these?

Going to be attempting this myself...going to be putting shackles in the back as well.

 

[OlYeller]

Would i need to extend the brakelines with installing 3" spindles?

 

[ForOffRoadDriving]

you may need longer brake lines, i guess it depends on how much farther your down travel increases with the drop spindles. the only other thing i can think of that you may need would be ball joints, just because youll already have the knuckle off.