levelling kit requirements?

[1991 Blue danger ranger]

i want to get a levelling kit for my 1991 4x4, as i like the space between the tires/ fender in the rear and would like them to match. i figure 2' should be enough to even it out. my question is, what all in do i need? every 2 inch levelling kit just includes springs, and nothing else. is my truck going to need anything other than springs? TIA.

 

[Poppa_R]

You can also level it with spacer blocks under the coil spring where it sets on the axle, You can probably get them from Amazon,

 

[MT_PLS]

I just installed these a couple of weeks ago:

1.5 Inch Leveling Kit | Ford Bronco II (84-90)/Ranger (83-97)

1.5 Inch Leveling Kit | Ford Bronco II (84-90)/Ranger (83-97)

www.roughcountry.com

My ride quality is greatly improved, the truck handles better, and the springs were less than $100 shipped.
If you go this route, you will need a 30mm socket and enough extensions to reach the retainer bolt from the top of the coil spring. Install took about an hour per side,

 

[MaicoDoug]

So where are the tastie before & after pictures that we all stay awake at night thinking about??

Glad it all worked out. Can I make a request, post a link using that chain link thingy between the picture icon & the T icon. Just copy & paste the address into the box.

Having the front up a little makes the armadillos much easier to remove after the long road back from the dance hall on Saturday nights.

 

[superj]

i was up in central texas a few weeks ago and saw the craziest animal crossing the road. so much that i had to stop and run back and take a picture.

it was porcupine. i had never seen one in real life. imagine hitting that and having to pull it out of the grill or lower radiator area.

 

[MaicoDoug]

Don't laugh, after 25 years here in Brazos county, I saw my very first aardvark! It's exactly like an armadillo except with fur. That's who has been digging up my lawn.