keyless entry Bronco 2

[chrwilkins30]

I've searched but cant find anything. Its for a 88 bronco 2 with manual windows that was converted from electric and it still has the wiring harness intact. so How would i be able to make it so i can lock and unlock the door at a push of a button.

 

[jzoomer]

get al alarm system with the keyless entry remote. run all the wires as described in the instructions, all you need besides that is an actuator for each lock and find a place to mount it, its really simple just got to get the parts if you have any more questions i will try my best to help i know a good bit about doing custom aftermarket automotive electronics (mecp certified installer since 2005)

 

[chrwilkins30]

Wouldn't this work.

http://www.autozone.com/autozone/ac...&fromString=search&itemIdentifier=632148_0_0_

 

[jzoomer]

if you have automatic locks currently yes it will work, if you have manual locks it will still work you would just also have to install and purchase the actuators as well

 

[chrwilkins30]

okay. i will give it a try. I had power locks but go rid of the, but all the wiring and everything it still there. thanks for the help.