James Duff Radius Arm Kit ?s

[1992DangerRanger]

I was thinking about ordering the James Duff radius arm kit for my sas but I'm unsure if the kit will work with my full width f150 dana 44. The axle is already set up for radius arms and coils does anyone know if it is a direct bolt on or would I need to get the kit they make for the broncos? Here is a link to the ranger bronco 2 kit http://www.jamesduff.com/broncoII/radiusarms.html and here is the link to the bronco kit http://www.jamesduff.com/eb/suspension_components.html

 

[bobbywalter]

bronco kit

 

[ThatGuy]

I have the SAS "kit" on my explorer. There are a few others here that have used some of the parts to do a SAS as well. You will want to get the arms that come with frame mounts for a C-channel frame. They have other parts as well but the arms are the biggest cost. Check either my build thread or for more reading pleasure look up Foxracin as he has put a lot more effort into his. For more info I would suggest just calling up Duff and talking to them about what you need.




Foxracin build thread
http://www.therangerstation.com/forums/showthread.php?t=71438&highlight=91+exploder

My build thread
http://www.therangerstation.com/forums/showthread.php?t=90375&highlight=thatguy+explorer

 

[michowski]

I have a question about the duff radius arms. Dont want to start a new thread so il just post it here. Do the brackets that attach to the frame require drop brackets?

 

[aspevacek]

The brackets bolt directly to the frame. If you use thier arms and brackets together you will not need to use anything other then what is sent to you or what is on your vehicle. That means you will ge tevery bolt , washer, nut and spacer that is needed. If it is not in the box you are generally supposed to use the thing that is already on the truck. I did my stage 3 a few weeks back and every single bolt that got put on was brand new and included with the kit.

 

[michowski]

Well I forgot to mention my truck does have a 4 inch lift installed. Do I need the drop brackets attached to the frame when I install the JD radius arms or are they already built in with a drop?

 

[legoms013]

Well I forgot to mention my truck does have a 4 inch lift installed. Do I need the drop brackets attached to the frame when I install the JD radius arms or are they already built in with a drop?

They just bolt to the frame, not drop brackets necessary.