- Joined
- Jan 30, 2017
- Messages
- 455
- Points
- 601
- Age
- 34
- City
- Puyallup Washington
- State - Country
- N/A
- Vehicle Year
- 2002
- Vehicle
- Ford Ranger
- Drive
- 4WD
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 0
- Total Drop
- 0
- Tire Size
- 31 inch
I bought 2 new clips for $14.85 from the fords part department earlyier today about 6 hours ago then i came home and tryed putting the 2 screws through the 2 clips but the clips holes where 2 small so i took the clips out when i took the right clip out the clip fell down inside the top of the cab and the screw fell down between the cab and bed so i spent 2 hours looking for that screw i then used my electric leaf blower on the high setting for maybe 2 minutes under my truck on the passenger side then drivers side i found the screw in between the chasis and metal below the middle of the gas tank. I then put the 2 clips in the vise and i made the holes in the clips bigger by turning the screws down then i put the clips in the back of my cab and tightened the 2 screws down in my 3rd brake light assembly until i couldn't turn them anymore i hope the rain water will stay out of my 3rd brake light now =)
Attachments
Last edited:
