i need help please


DangerRanger1990

10+ Year Member

Joined
Mar 4, 2009
Messages
6
Points
3,001
Vehicle Year
1990
Transmission
Automatic
ok i have a 90 ranger 2.9 xlt i replaced the alt and batt but the batt light is still on im stumped please help
 
Charging light on

Have you checked the alt output please?
 
better post it in the electric section, u would get better results :icon_thumby:
maybe the alt relay?
 
Did you clean all of the terminals on the wires? This may sound dumb, but when the engine is running, is the fan belt slipping (screeching) at all? If so, it may not be spinning the alternator quick enough. Just a thought.
 
Check the alternator for voltage output. It should read around 14vdc at the battery with the engine running.

If the alternator is charging, the wire from the alternator to the lamp may be shorted to ground somewhere. It is the lt grn/rd wire. Disconnect this wire from the alternator and see if the lamp goes out. If it goes out, the alt has a problem. It is possible for the alternator to charge and not turn this light out.

If the light does not go out when disconnected from the alt, it has a short somewhere.

If the alternator is not charging, that would be the problem.:)shady
 

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram


Product Suggestions

Back
Top