• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

i beam ranger vibration after coil spacer lift.


Joined
Mar 9, 2010
Messages
16
Vehicle Year
1989
Transmission
Manual
i just finished installing 2 inch leveling coil spacer lift on my ranger to fit 31`'s and it all went smooth but when i drove it, the vibrations started to show up. With street driving the vibration is minimal but when you get on the highway past 50mph, the vibration gets worse. Any ideas?
 
This may sound stupid but i have known people who have done this, did you put the tires back on right? I mean like tighten them down and everything.
 
yep i always check the "usual". could it be the tires? the two rear tires are almost new but were sitting in my friend's backyard for a while, the two front tires are about 50% worn and they're both bridgstone duelers, while the two rear tires are different brands.
 
In my experience, worn out tires can cause vibrations. I'd try a different set of tires or swap the rear ones onto the front.
 
i feel so stupid haha, It turned out to be the tires. As soon as a swaped my stockers back on, the truck rode smooooooth
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top