how much of this and that

[cutlassranger]

i didnt know where i should put this but im goin to put to gear oil in front and back axle and in tranny and put atf in transfer case , how much gear oil should i need and how much atf should i need aslo wut else will i needfor this job

 

[exbass94]

The rear axle takes about 2.5 quarts, the front should take a little over 1 qt. The t-case takes over 1 qt. So, I would buy about 5 qts of gear oil and 2 qts of ATF.

The only things you'll need for this is a 3/8" drive ratchet, a socket for the rear diff cover bolts (don't know which size), a siphon pump to pump the oil out of the front diff, and some RTV for the rear diff cover.

I also recommend using one of these pumps to pump the oil into the diffs and t-case. It's not necessary, but it makes it a lot easier and much less messy.

 

[cutlassranger]

alrigth thank alot ... i just went to advanced auto and grabbed the stuff im not goi nto worry about the axle right at this moment so i jsut got enought for the t-case and tranny ... the guy at the store looked it up it said the tcase needs like 5 qts gear oil i wonder how come, ill be doin an oil change ,new pvc valve and tranny and t-case fluids tomrrow YAY!!