Hi from PR 302 swap questins

[dannzx6]

Hi, Im about to start my swap on my 98ranger whit a 302,what type of system is beter to use for the clutch,hyd or cable? and what about the a/c system,the ones that I sen have a cut on the side of the passanger rigth side where the are duct is.Any ligth will be apriciated

 

[5.0]

Factory was hydraulic, so it can be done using factory parts that way. I'm guessing that would be the easiest, but I have no real knowledge on the subject.

 

[Mac]

Welcome! With the '98' and later swaps, things have changed. Go hydraulic, find Explorer motor, sit down and read all this info on the swap.
Dave
http://www.therangerstation.com/tech_library/5_0_swap_in_newer_ranger.html