• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

here we go


Focklerx33

Well-Known Member
Joined
Jun 20, 2009
Messages
167
City
Belleview Fl
Vehicle Year
1993/1996
Transmission
Manual
to start my mph gauge works but trip or my miles don't move.

next when im on the throttle my oil pressure gauge is fine when my foots off the throttle it goes crazy spinning around and around. and the check gauge light blinks.

thanks in advance
 
The odometer is replaceable, but it is a meticulous job.
I'd suggest throwing a whole cluster in there instead. Upgrade to one with a tach if you don't have that already. http://www.rangerpowersports.com/fo...Switching-guage-cluster-w-o-tach-to-with-tach..

The oil pressure sender is a switch. They go bad and are cheap. Try replacing that first unless you hear a lot of valve clatter at idle, then you have a real pressure problem.

It's located on the rear pass side of the block (or is it the head?) on the 3.0. Might use a mirror and light to really see it. Probably easier to get at it from underneath.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top