GEN III trucks, '93-'97's

[legoms013]

Does my '96 mazda B4000 count???

http://viewmorepics.myspace.com/ind...dID=427358708&albumID=1003653&imageID=6763789


http://viewmorepics.myspace.com/ind...dID=427358708&albumID=1003653&imageID=6763775


http://viewmorepics.myspace.com/ind...dID=427358708&albumID=1003653&imageID=6256829

Sorry im a newb and dont know how to put the pics right on the post

 

[Kyle M.]

Does my '96 mazda B4000 count???

Sorry im a newb and dont know how to put the pics right on the post.

You have to put

for you pictures to show, I fixed it for you but your pictures wont show because they are marked as private on myspace.

 

[dburton07]

I'll play. 93 4x4 140k miles.

A little dirty

Clean

The list of what I want to do:

Leveling kit
3" BL
32's
4.10s
Manual T-case and hubs
Lockers
New front bumper
Lil' bit of cancer work
4.0 w/ 5 spd

 

[wizkid00104]

some randoms:

I love this and I had the same thing in mind for my truck! Might I make one suggestion? Why not put the ford emblem off the stock grill right in the center of the billet one. I have seen a picture of it before and I love it!

 

[Resurrection Ranger]

heres mine

got it in december so i havent done too much yet

Are those the orginal seats? I'd like to get a set of comfys like them. I got a 60/40 I'd like to change around to adapt a better console set up.

Thanks. Nice truck!!

 

[racsan]

I picked up a load of firewood today, oak at that. dont have a weight-distributing hitch. that might have helped me some. the front wheels locked up and slid a few times at stops due to not having enough weight on the front axle and being pushed by however much weight was behind me. didnt load it quite as full as i had space for, i knew i was pushing it enough as it were. there was enough space to get a hand between the trailer tires and fenders, but not much more. next trip i may take the full-size bronco, if for no other reason than having better brakes.

had the front hubs unlocked but did use 4 low to get out of the yard and through town. EDIT : 3/1 : didnt have the camera with me today, i picked up a stake sided 5x8 trailer and got another load of wood, this load wasnt so hard on the little truck, rear axle was onto the overloads but not hard into the bumpstops like yesterday. had oak blocks between the trailer axle and frame, whoever built this trailer didn allow enough fender clearance for suspention compression, in other words if i didnt keep the suspention from fully compressing, i would have been smoking the trailer tires on the undersides of the fenders. the trailer tougue was a bit bent by the load. at least time i could go over 50 without the tail wagging the dog, front brakes didnt lock up and slide either. dont like transporting firewood on a open trailer due to all the restrictions on firewood transport in this state these days. the big box trailer i still havent unloaded from yesterday, but it probly would attract more attention what with the front of the truck up in the air and tires squalling at every stop.

 

[twinky]

 

[LoneRanger93]

yea i like those tailings? is that tailgate off a new truck or did u just take off the emblems?

I bought 3 emblems for an 06 ranger, the taillights started out as stock 06s as well but I nightshaded them

 

[TheTopher]

Here's my contribution

I'm lovin' the dirty truck pics, can't wait to get a trail rig of my own.

 

[Viper Command]

the topher where did you pick up your seat covers at? they look damn good.

 

[racsan]

nice sunny day here, put my winter rims away and put the factory alloys back on.

 

[TheTopher]

the topher where did you pick up your seat covers at? they look damn good.

Thanks mate. I picked them up from wetokole.com

 

[Clay_95Ranger]

Doin my part

Heres my part hope the picks work, 3" Rancho Suspension, 2" Body, 15-32 Tires, Customs front and back bumper, skid plate...pretty average...

[/IMG]

[/IMG]

 

[LITTLE FOOT]

^i see a hell of alot of snow and not too much truck,lol
nice bumper

 

[Clay_95Ranger]

haha

Haha yeah bout that, kinda sad but i jsut realized these are the only picture of my baby lol but shes down right now not to sure if anyone knows where to get a refurbsihed enigne 3.0 V6 95....???