gen III transfer case boot

[badmts]

well they put in my jeep hubs today and tech tells me he thinks driveline slop is xfer case-it is button type-and it should go,i ask about swap to man xfer and he says good idea. now before you start with the WRONG place comments I need to know the straight scoop on FLOOR HOLE CONSTRUCTION for case shifter and are the boots available from dealer or only used(saw 1 on here once)?

 

[nitrofan1]

Not sure on an OE boot but what about aftermarket?

Try these. Maybe ya can adapt them for the need.

http://www.quadratec.com/products/52110_03.htm

http://www.amazon.com/Omix-Ada-18606-03-Transfer-Case-Shifter/dp/B000FQ21TM?tag=959media-20

http://broncograveyard.com/bronco/i-21620-transfer-case-shifter-boot.html

http://www.trail-gear.com/transfer-case-shifter-boot

A lot of people always look for an OE replacement but I have found that with mods anything can work. I don't if any of this will help but I'm a 4x4 virgin more or less. My 93 is push on the fly so I've never researched a manual conversion.

 

[badmts]

You are so right ,I completely spaced on the aftermarket. The last/only one on here was $50 ! fifty bucks for a used boot seemed high,so thanks i will try the aftermarket.btw I am from Nashville came out here with Army.SEE ROCK CITY!