Welcome Visitor! Please take a few seconds and AlienBronco
Member
I posted here a while back about my BII not wanting to start, checked all of the typical issues with negative results.
I had submarined the rig in a bog last year and had mud 14" deep in the rig. Yesterday I decided to Ohm out the inertia switch to see if it had failed, what I found were corroded connections! Cleaned them up and Vroom started up first shot.
One more thing for the frustrated to check, Good lick
I had submarined the rig in a bog last year and had mud 14" deep in the rig. Yesterday I decided to Ohm out the inertia switch to see if it had failed, what I found were corroded connections! Cleaned them up and Vroom started up first shot.
One more thing for the frustrated to check, Good lick
