From the shadows...

[Eskishmo]

I have been lurking on these forums for quite sometime without an account. Now that I'm starting to do some stuff with my truck I figured it is time to step into the light. From what I have seen over the years this is the place to come for information on ranger builds. I'll try and get some pictures posted up soon. I appreciate everyone's help in advance!

 

[alwaysFlOoReD]

Yes, we need pics.
Welcome to TRS,

Richard

 

[AgPete139]

Welcome!

 

[Eskishmo]

Some pics...

Ok! After digging up some old accounts I found a place to upload some pictures I took the other day.
They aren't great but they are better than nothing at all. Without further adieu...





I'm in the middle of getting bodywork started. Believe it or not the bottom front right section of the bed in the
next picture was pushed in about 8 inches all over by an eclipse one lovely day. Got that out a few weeks ago.
Unfortunately, I cannot find any before pictures.



Had a softball sized dent that had a bunch of surface rust behind the bumper. Unfortunately, I don't
have any pics of it before I pulled it out with the stud gun. The metal was kinked a little on the corner and had
some holes from stud gun.



Got the holes and kinked valley wielded up...



...and shot some epoxy primer over the bare metal for some protection.



I intend to deal with all the dents and repaint the whole truck.
There is a lot I would like to do but this is a good starting place.