For the Low guys got some questions

[97LowRanger]

hey guys i lowered my ranger its a 97 regular cab 2wd, lowered with 3/4 jdm kit have stock shocks up front and 3-5 inch lowering shocks on the rear i want to go lower! i plan on getting the belltech 2" drop springs, flip the rear hangers, get the crown c notch, and trans crosmember.
Ok so front do i need new shocks? also is a 4 degree camber bushing good enough?
trans crossmember i only see them from illusive designs anyone ever used it?
rear c notch is it enough to have a decent ride? help is appreciated i wanna see her lower! and if it matters much im running 16" cragars, with 225/60R16

 

[stmitch]

Yes, you will need drop shocks.

It may or may not be totally alignable with a 5 inch drop in the front no matter what size camber bushings you use. Every truck is a little different, and every alignment shop has different capabilities. If you want to go lower than a 4 inch drop, you have to accept that you may always have alignment issues, and may wear tires unevenly or faster than you otherwise would.

C notch should be enough in the rear to avoid the huge bumps, but quality shocks have a lot to do with how it rides.