Welcome Visitor! Please take a few seconds and Vamirr
Member
- Joined
- Jan 28, 2012
- Messages
- 11
- Vehicle Year
- 94
- Transmission
- Manual
I'm in the middle of reworking my steering shaft on my 94 lxt with the flaming river ujoints. I'm finding that these ujoints aren't fitting on with ease.
I wanted to run this by those of you who've done this mod. Did getting the ujoints on require some hammering? Particularly with the ujoint that goes on the input shaft of the steering gear.
The ujoints I've purchased are the 1" DD x 3/4" -36 and the 1" DD X 3/4" DD.
I wanted to run this by those of you who've done this mod. Did getting the ujoints on require some hammering? Particularly with the ujoint that goes on the input shaft of the steering gear.
The ujoints I've purchased are the 1" DD x 3/4" -36 and the 1" DD X 3/4" DD.
