arren
Well-Known Member
I recently installed the Explorer full size console in my 94 and while doing research didn't come across too many pictures of them installed in this dash style so I wanted to post up a few of my results for people to reference
Passenger side at the dash
Drivers side at the dash with my cb installed
In the back where the hole is, there was originally the controls for the stereo and hvac but since mine is a manual the ducting had to be cut out so the piece that was originally where the shifter is now was cut in half and the back now has a sort of cubby hole. Also I thought the console would bolt right in some factory mounting holes, but this was not the case and i had to drill and bolt it to the floor, no big deal though.



Passenger side at the dash

Drivers side at the dash with my cb installed


In the back where the hole is, there was originally the controls for the stereo and hvac but since mine is a manual the ducting had to be cut out so the piece that was originally where the shifter is now was cut in half and the back now has a sort of cubby hole. Also I thought the console would bolt right in some factory mounting holes, but this was not the case and i had to drill and bolt it to the floor, no big deal though.