Euro tail lights for a 1989 ford ranger

[Desmond Zacharias]

Does any happen to know where i could find some Eurotail light covers for my 1989 Ford Ranger. I've looked around for them but i haven't had any luck. If you know anything about this please post me back. Thanks

 

[sweetsride]

evil-bay is probley your best bet

Kris

 

[forddude]

taillights

http://www.autosupermart.com/store/shop/IPCWTCE507C.html

http://www2.partstrain.com/v5/products.php?N=10336+4294967012+1616+9315


Here's what I could find. Hope it helps.

 

[Shoeboy]

I do believe LMC Truck has them as well. I made a set of my own out of the factory lenses, they looked factory, but they were all LED's. 2 boards per light, and about 100 LED's per corner. They were bright, and were completly unique. I had to make them myself (I paid a friend to), and they cost me about $200 to do.

 

[kunar]

I do believe LMC Truck has them as well. I made a set of my own out of the factory lenses, they looked factory, but they were all LED's. 2 boards per light, and about 100 LED's per corner. They were bright, and were completly unique. I had to make them myself (I paid a friend to), and they cost me about $200 to do.

do you still have them or did they get junked with your truck???

 

[lil red]

yes they do
in chrome
black
and carbon fiber

 

[Shoeboy]

One stayed with the truck, but I'm not sure in what condition, and the other one went somewhere where even the clean up crew couldn't find. So the one stayed with the truck. If you're good at soldering and have some time on your hands, this isn't a hard project, just a time consuming one. If I had both, I would have taken them with me for a situation like this. If anything was salvagable off the truck I would have taken it with me.