Escorts 2nd SAS

[Beef52751]

you'll love it, i hardly notice mine on pavement anymore, but it is awesome when im playing!!!

 

[legoms013]

Can't beat that.

Picked up an Aussie for my D44 today for $225 brand new never installed off Craigslist

 

[escort_gts]

Can't beat that.

Picked up an Aussie for my D44 today for $225 brand new never installed off Craigslist

Looks like you scored also.

Sent from my HTC EVO using Tapatalk

 

[escort_gts]

I've been trying to decide on how to trim the fenders. I want to keep it looking as much as stock as possible. Don't want to cut more than I need. I was thinking just trim the bottom corner, that's the only place it rubs...but what do I do with the inner fender?

Sent from my HTC EVO using Tapatalk

 

[kroussinoffroad]

i jsut cut the rear portion off my inner fender on the mazda. about 6" up from the rocker area straight across twords the engine bay

 

[escort_gts]

That might work. I might even try to fold it to make it look like stock.

Sent from my HTC EVO using Tapatalk

 

[escort_gts]

My brother gave me an idea, cut a v out of the bottom and then weld it back together so that way I keep the factory edge. This way I won't have any Sharp edges. What does everyone think?

Sent from my HTC EVO using Tapatalk

 

[kroussinoffroad]

V for vendetta?

I guess i dont follow?

 

[escort_gts]

Cut a v notch out of the bottom of the fender instead of just hacking the corner off. I wish I could take a pic and draw an example. Ugh. It's hard to explain with out pictures.

Sent from my HTC EVO using Tapatalk

 

[kris97ranger]

i know.what u mean itd work but u have to extend.it too

 

[escort_gts]

i know.what u mean itd work but u have to extend.it too

I knew someone would get it. I know I need to extend it, just add some sheet metal and all is good.

Sent from my HTC EVO using Tapatalk

 

[escort_gts]

What is this that I got today?

Sent from my HTC EVO using Tapatalk

 

[Kyle M.]

I get it, should work fine, but you will have to repaint after you weld. What if you cut, then fold it? Meaning, draw a line where you want to cut, then move it over an inch, cut, then bend it back at the original line. That way you dont 'have' to weld. Just my idea.

 

[escort_gts]

I get it, should work fine, but you will have to repaint after you weld. What if you cut, then fold it? Meaning, draw a line where you want to cut, then move it over an inch, cut, then bend it back at the original line. That way you dont 'have' to weld. Just my idea.

That's a possibility. I'm not worried about painting, my brother does a good job at that.

Sent from my HTC EVO using Tapatalk

 

[RangerBoy94]

OHHH pretty locker!!! Let me know how you like it on the streets I'm thinking about getting a lockrite in a few months.