- Joined
- Sep 24, 2009
- Messages
- 10,700
- Points
- 3,101
- City
- Walls, MS
- Vehicle Year
- 1988
- Transmission
- Automatic
Here's what I found out...
no highsteer on dodge d44, unit bearing, cad axle. they do have a parallel 4 link, so you'll want to cut that off and start fresh.
yes there is the cable upgrade, but a 1 piece shaft would be better IMO.
rear is chrysler 9.25, not a highly recommended axle in our world. C-clip, semi-float, 31 spline...
not a huge step up from the Ford 31 spline 8.8
no highsteer on dodge d44, unit bearing, cad axle. they do have a parallel 4 link, so you'll want to cut that off and start fresh.
yes there is the cable upgrade, but a 1 piece shaft would be better IMO.
rear is chrysler 9.25, not a highly recommended axle in our world. C-clip, semi-float, 31 spline...
not a huge step up from the Ford 31 spline 8.8