Dumb Question

[GubuZ06]

If my front end looks like / \, will I need an alignment after 1.25 inches of coil washers to lift ~1.9 inches? Also, will the fronts look more like ||? Assuming this will happen isn't my fronts reverted back to stock stance which hopefully means I wouldn't have to align? I think I over complicated a very simple question...TIA.

 

[Original_Ranger84]

Any time you mess with something it is a good idea to get it aligned unlees you don't care about the tires in which yeah just go for it...

It will probably help out with the alignment alot if they don't ahve to corret the camber...? or is it caster...? I don't know but it will help out alot...

 

[4x4junkie]

Adding some spacers/washers will certainly help correct a /--o-\ condition. At the very minimum you should still check your toe-in alignment though. If you find it pulling toward one side afterward, then a caster adjustment may be needed too.

 

[RangerSVT]

A good reason why your tires are like they are is due to your springs settling. If you have added an aftermarket/custom bumper and/or winch, this has enhanced the settling of your coils. Adding spacers will bring it back close to factory, but as stated above you will need to get it on an alignment machine
SVT

 

[GubuZ06]

Thanks everyone for your input.