• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Dream Garage


Cool old two bay gas station would be neat

Real world... 60x40 metal shed with heat a/c and a bathroom. An office (maybe on a mezzanine) would be nice too.

Room for a lift plus two open bays and room for a regular shop with welder, torch, tablesaw, drill price, maybe a band saw, media blasting cabinate etc.

And room to store my camper.

Barns-40x60-barn-metal-building-rendering-3-1.jpg
Still too small. I’m looking at a 30-40’ deep and 80-100’ wide with a basement level and a second floor storage level on my property. Since it’s sloped ground, the basement level will be full on with garage doors for storing my boat and tractor and all the toys like that. Main floor will be a working level with at least a 2-post and a 4-post plus some other bays.
 
Still too small. I’m looking at a 30-40’ deep and 80-100’ wide with a basement level and a second floor storage level on my property. Since it’s sloped ground, the basement level will be full on with garage doors for storing my boat and tractor and all the toys like that. Main floor will be a working level with at least a 2-post and a 4-post plus some other bays.

General tractor storage would be in the porch-like eaves which could be enclosed later if I wanted.

Four post lift with jacks would be fine with me. That in one bay, other bay open for lighter repairs/Ranger storage and a third bay for whatever and winter snowpusher tractor storage.
 
If I started over and wasn't limited by my lot size I would probably do something like this, at minimum. This is a 40x70 split up into 3 zones:

Screenshot 2025-12-22 131339.jpg


Zone one on the left is the work bay (40x32) with a two post lift and I'd consider it to be kind of the "dirty" place, there would be a floor drain under the lift and I would have a pressure washer set up in there. Tools and stuff that can't get wet would be on the north wall, the east and west walls would be a workbench and maybe larger tools. This area would be heated and would have high ceilings (14-16'.) Drive through 14' doors on the middle and west walls.

Zone two on the upper right would be for woodworking tools, parts/chemicals/etc and a couple racks of shelving for things like blow mold cases and stuff like that. There would be an 8' wide garage door leading into here. This room probably would be heated too but the ceilings would be lower, 8' probably.

Zone three is the vehicle storage bay, 16' door on the east wall. That area is roughly 38x27. Unheated, probably 10' ceilings.

Zones 2 & 3 would have an attic above them - if I did 10' walls on the storage bay, I could have a 4-5' high spot to store stuff up there. The attic above Zone 2 would have 7-8' walls, semi finished, just as sort of an office/clean space for a reloading bench and some things that need to stay somewhat clean and temp controlled.

Outside there would probably be a lean-to on one of the long walls, not necessarily even totally enclosed... 3 sides maybe... for things like lawn mowers, wife's car, etc.
 

Sponsored Ad


Sponsored Ad

Event Coverage

Events TRS Was At This Year

TRS Events

Member & Vendor Upgrades

Become a Supporting Member:

Or a Supporting Vendor:

Latest posts

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

TRS Merch

Follow TRS On Instagram

TRS Ranger Sponsors


Sponsored Ad


Sponsored Ad


Product Suggestions

Back
Top