dpfe sensor

[tonyjklh]

i have a b4000 truck, but it seems to not have all the emisions stuff complete(just bought the truck)

sorry this is not my picture but it does show the dpfe sensoron there as referance. it is the silver one (not bolted on) hanging by hoses(towards bottem of picture)

however on my truck ther are no hoses connected and i dont know where to put them. can someone tell me where they go.

 

[AllanD]

this is not "Mazda specific"

I'm moving it to 4.0 where you will get the attention you need.

AD

 

[Sasquatch_Ryda]

I'll move it from the transmission forum to the 4.0L forum for ya Allen

 

[AllanD]

I was moving several posts out of mazda and moved one to the wrong place...

AD

 

[97ranger4x4]

Unfortunatly the picture is blocked because of the host on my work computer. But I think I know what your talking about and can try and visually explain it to you. So the two holes at the bottom of the DPFE sensor are supposed to have vaccume line that goes only 8 inches or so to a metal tube that runs next to the driver side exhaust manifold. Basically there should be two small outlets to that tube that are spaced a few inches apart. If I remember correctly, the passangers side vaccume line (on the DPFE) goes to the inlet that is closer to the front of the truck. Therefore the driverside vaccume line goes to the inlet that is closer to the firewall of the truck.